Custom make 之 intercooler 導風喉!

一路都懶無整, 自從換左下3件之後, 一路都無整導風喉去intercooler度!
得閒攪攪佢! 要custom make! 原裝果個唔fit位!

最好用A3 folder 因為夠大, 任我cut!





無裝喉, turbo leg 係夏天多左, 要上到2000rpm 先發力,
但係裝左之後, 回復本身應有水準! 加速爽朗!

A3 folder: $10!

碳纖化 VW 章

自從DIY 噴章之後, SMD 激速常被石仔打花,
要頻頻補油 為免再補完又補, 為有碳纖化 VW 章!!



工具之準備!!

成塊貼落去! 裁好!
再用力拉貼!!
彎位難收! 幸好貼子本身有彈性, 可以拉盡一點貼近灣位!
貼時可用熱風吹, 會比較容易
收邊!! 開𠾐!
半完成品!!
攪惦!! 貼完!! 過程艱辛!



彎位難收! 幸好貼子本身有彈性, 可以拉盡一點貼近灣位!
貼時可用熱風吹, 會比較容易


貼完可用熱風吹, 能令貼子本身緊貼 VW 章!
接近完美...


碳纖貼子: 1 meter/ RMB $15

PUG仔 帶黑超

終於忍唔住夏天嘅熱力... 30幾度,走入車廂, 實在難受!
帶左PUG仔去左 FSK 帶黑超!


平時帶開平光鏡嘅PUG仔!

未貼前, 原廠玻璃係藍藍地

貼完2日後唔可以開窗!

今日帶左黑超!!
唔敢貼太黑, 驚夜晚睇唔到路就大鑊!

貼左後... so far 感覺良好! 唔太黑, 又有私隱, 又隔熱!


帶黑超過程大概須要2小時, 今次唔留係FSK睇佢點搞,
唔等太耐, 去左 APM 行街!

貼左F-50, U字位 $2680.
包一次前玻璃翻貼. 保用5年
http://www.fsk.to/main.htm

Service Day! change! change change!!

Engine oil change, Tranny oil change, every oil change! change change!!

This time go to Yuk Ming Garage!


PUG is on the table!! with no leg!Knocking sound coming from the driver side for some reason, and its time to check up!
Forun out both side of CV joint dust cover was broken!! and need to be replace!


"Gin gor" took off the whole suspension and inspect!

Top mount seems like ok!
May be here comes the sound??

Everything took off..... >.<~
Also replaced the MIC drop link.
Now working on the breaks!
This time use Motul 660! Dot4 break oil!

Prosport boosts gauge installed!

Wanna have this thing install in my PUG for a really long time,
before i brought a MFD, people say it could display Turbo boost, Check all the fault code, and make some hidden function works in your ride... so i brought it!

but afte a few years, update and update, it still doesn't work with the turbo boost... so i have to work it out this way!

Took a look in the local auto parts store, and non of them are cheap, most of them are in HKD 1000 or more, checked out Defi and some taiwannese stuff, they are expensive!

came accrose in Ebay and i found a gauge is cheap for this task! finally i got the Prosport Turbo boost gauge!!

http://prosportgauges.com/Blue-white-premium-electric-boost-gauge-.aspx



Its hard to install it myself, thx Frankie and berry for the help! really thx!
the hardest part is to find the right electric wires and let the sensor wire get into the interior.

It does came with black, red, white and orange wires for connections


Here is how the hose goes!

Sensor located in here, due to the wire length

Finally!! The new Boost gauge installed!.

Check out the Utube here!
http://www.youtube.com/watch?v=l-l-Ggd5Tvc

The beeeeepppppp sound is so freaking annoying! so i have to do something to it after awhile!

Got some idea how to install it, but somehow it doesn't work that way, so i have to find my way to work it out!
http://www.vwwatercooled.org.au/f127/guide-how-fit-boost-gauge-35780.html

And i got this in China...
very nice one and detailed! Cost me only RMB$40!!! so cheap!! nice buy this time!

Forge DV installed!!

a Friend of mine in UK just came back to Hong Kong and he brought me this!!
Forge DV!!
Feel much much more power coming out after 4500rpm! worth to buy this little thing!!

換完DV感覺似新車！下下比油下下有力上!條氣暢順果然唔同!遲D換油洗Filter更加好玩!
底轉Turbo Lag又少左D, Polo身軀細少靈活 加上 1.8 Turbo engine 黃金右腳更加不能自拔!
真係開心過玩APM! 讚!



Hidden! ... i guess.. LOL

Today! I hit 40K!! Time to do some service!

DIY 尾門開關

話說有一日... 開尾門取東西... 開到...但係一關門就聽到有野跌左係裡面...心知不妙... 再開...唔到尾門! 聽到有電索聲, 但係開唔到...要用鎖匙先開到...
今日SMD後, DIY 攪攪震!!

先拆開尾門內 Cover... 要多點暴力!

一拆之後! 原來甩左粒野!!

上返佢!
再用索帶索好! (索帶好用! XDDD)
裝返攪掂!